MSA Fall Protection Lanyard- FP4K
FP5K Tie-Back Lanyard by MSA Fall Protection
Product Information
Uses the FP5K carabiner, a tie-back lanyard connector available in web or cable version. The outer side of the FP5K carabiner gate has a knurled surface to provide a secure grip on the gate when opening. The inner side of the gate has flattened edges to keep lanyard/gate contact at a minimum. Five thousand-pound gate strength in any direction allows the FP5K carabiner to be tied back directly to the lanyard. The unique carabiner body shape helps avoid confusion with standard connectors not designed for tie-back applications. The FP5K carabiner design allows for maximum clearance inside the body of the carabiner, a one-inch gate opening. The web version utilizes Monster-Edge™ webbing, designed for increased abrasion resistance, with 12,000 pound minimum breaking strength. An internal wear indicator consists of two yellow threads that, when visible, alert a user when the lanyard should be removed from service due to severe abrasion. Utilizes the Sure-Stop shock absorber to keep fall arrest forces below 900 pounds. Available in both single and twin leg configurations.
Approvals & Standards
Meets OSHA regulations, ANSI A10.14, ANSI Z359.1, and CSA approval pending.
Applications
Construction
Manufacturing
Hazardous Materials
Spray Painting
Sand Blasting
Welding
Mining
Oil & Gas
Chemical
Electric Utility
Nuclear
Paper & Pulp
Sanding & Grinding
Stage Rigging
Roofing
Scaffolding
Telecommunications
General Industry
Automotive
Warehouse
Railroads
Hazards
Confined Space
Falling From Heights
FP5K Tie-Back Lanyard by MSA Fall Protection
Product Information
Uses the FP5K carabiner, a tie-back lanyard connector available in web or cable version. The outer side of the FP5K carabiner gate has a knurled surface to provide a secure grip on the gate when opening. The inner side of the gate has flattened edges to keep lanyard/gate contact at a minimum. Five thousand-pound gate strength in any direction allows the FP5K carabiner to be tied back directly to the lanyard. The unique carabiner body shape helps avoid confusion with standard connectors not designed for tie-back applications. The FP5K carabiner design allows for maximum clearance inside the body of the carabiner, a one-inch gate opening. The web version utilizes Monster-Edge™ webbing, designed for increased abrasion resistance, with 12,000 pound minimum breaking strength. An internal wear indicator consists of two yellow threads that, when visible, alert a user when the lanyard should be removed from service due to severe abrasion. Utilizes the Sure-Stop shock absorber to keep fall arrest forces below 900 pounds. Available in both single and twin leg configurations.
Approvals & Standards
Meets OSHA regulations, ANSI A10.14, ANSI Z359.1, and CSA approval pending.
Applications
Construction
Manufacturing
Hazardous Materials
Spray Painting
Sand Blasting
Welding
Mining
Oil & Gas
Chemical
Electric Utility
Nuclear
Paper & Pulp
Sanding & Grinding
Stage Rigging
Roofing
Scaffolding
Telecommunications
General Industry
Automotive
Warehouse
Railroads
Hazards
Confined Space
Falling From Heights
